1. System software is the set of programs that enables your computer's hardware devices and _______ software to work together.
(a) Management
(b) Processing
(c) Utility
(d) Application
(e) None of these




2. _______ are specially designed computer chips that reside inside other devices, such as your car or your electronic thermostat.
(a) Servers
(b) Embedded computers
(c) Robotic computers
(d) Mainframes
(e) None of these




3. SMPT, FTP and DNS are applications of the _______ layer.
(a) data link
(b) network
(c) transport
(d) application
(e) None of these




4. According to which of the following, in a database, should information be organised and accessed?
(a) Physical position
(b) Logical structure
(c) Data dictionary
(d) Physical structure
(e) None of these




5. WORM stands for _______.
(a) Wanted One Read Memory
(b) Write Once Read Many
(c) Write Original Read Many
(d) All the above
(e) None of these




6. Which of the following is separate software layer that acts as 'glue' between the client and the server parts of an application and provides a programming abstraction?
(a) Freeware
(b) Firmware
(c) Shareware
(d) User-supported software
(e) Middleware




7. Which of the following is a must for a computer?
(a) Chip
(b) Data
(c) Mouse
(d) Processor
(e) None of these




8. Disk can be used to store _______.
(a) Random files
(b) Sequential files
(c) Both (a) and (b)
(d) Horizontal files
(e) None of these




9. A derived class may also be called as _______.
(a) sub-class
(b) super class
(c) parent class
(d) deprived class
(e) None of these





10. The capacity of program counter is _______.
(a) 8 bits
(b) 14 bits
(c) 16 bits
(d) 12 bits
(e) 32 bits




11. In _______ generation computer the speed was measured in nanoseconds.
(a) first
(b) second
(c) third
(d) fourth
(e) fifth




12. The process of transferring of files from your computer to the computer on the internet is called _______.
(a) downloading
(b) uploading
(c) FTP
(d) sharing
(e) downsizing




13. Timing and control unit is a part of a(n) _______.
(a) ALU
(b) Processor
(c) Memory
(d) CMOS
(e) BIOS




14. Chip is the common name for a(n) _______.
(a) transistor
(b) resistor
(c) integrated circuit
(d) semiconductor
(e) None of these




15. _______ is developed specifically for a distinct industry.
(a) Personal productivity software
(b) Application software
(c) Decision support system
(d) Vertical market software
(e) System software




16. Which of the following services is not provided by Internet service provider?
(a) Internet transit
(b) Domain name registration
(c) Hosting
(d) Dial-up access
(e) None




17. A source program is written in a _______ language.
(a) high-level
(b) low-level
(c) binary
(d) All the above
(e) None of these




18. The transfer rate of a standard USB 2.0 Device is _______.
(a) 100 M bit/s
(b) 250 M bit/s
(c) 480 M bit/s
(d) 500 M bit/s
(e) 1 G bit/s




19. The control part of a disk is known as
(a) surface
(b) hub
(c) cylinder
(d) cluster
(e) None of these




20. Which of the following languages is used for process control?
(a) ADA
(b) COBOL
(c) BASIC
(d) PASCAL
(e) LISP



Important For: SBI ASSOCIATES CLERK, NICL Assistant


NOTE: If you find any errors in the answers, please correct. Typing Error May Occur Anytime.